254 found, showing page 6 of 17
63PM3 50E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 63 PM3 is part of the Picco Micro 3 series chains. This chain has reduced kickback and low vibration features. 63 PM3 has semi-chisel cutters which are easy to sharpen and it will stay sharp longer than a chisel
chain.
- Pitch .375" Low Profile (3/8" Picco)
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
- Recommended Bar Lengths 10"-18" (25-45cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
63PM3 55E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 63 PM3 is part of the Picco Micro 3 series chains. This chain has reduced kickback and low vibration features. 63 PM3 has semi-chisel cutters which are easy to sharpen and it will stay sharp longer than a chisel
chain.
- Pitch .375" Low Profile (3/8" Picco)
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
- Recommended Bar Lengths 10"-18" (25-45cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
63PMC3 62E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 63 PM3 is part of the Picco Micro 3 series chains. This chain has reduced kickback and low vibration features. 63 PM3 has semi-chisel cutters which are easy to sharpen and it will stay sharp longer than a chisel
chain.
- Pitch .375" Low Profile (3/8" Picco)
- Gauge .050" (1.3mm)
- Sequence Standard
- Cutter Type Semi-Chisel
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes Up to 2.5 cubic inches (40cc)
- Recommended Bar Lengths 10"-18" (25-45cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
26RSC 62E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RS is part of the Stihl Rapid Super series. 26RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has no significant kickback reduction features (See warnings below), but does has the added benefit of lower vibration levels as compared to the older style 26RS chain. It is recommended for professional use only.
- Pitch .325"
- Gauge .063" (1.6mm)
- Sequence Standard
- Cutter Type Round Chisel
- Recommended File Size 4.8mm (3/16")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 13"-20" (32-50cm)
- Kickback Reduction Features None
View Details
Call for Price
26RSC 67E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RS is part of the Stihl Rapid Super series. 26RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has no significant kickback reduction features (See warnings below), but does has the added benefit of lower vibration levels as compared to the older style 26RS chain. It is recommended for professional use only.
- Pitch .325"
- Gauge .063" (1.6mm)
- Sequence Standard
- Cutter Type Round Chisel
- Recommended File Size 4.8mm (3/16")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 13"-20" (32-50cm)
- Kickback Reduction Features None
View Details
Call for Price
26RSC 68E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RS is part of the Stihl Rapid Super series. 26RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has no significant kickback reduction features (See warnings below), but does has the added benefit of lower vibration levels as compared to the older style 26RS chain. It is recommended for professional use only.
- Pitch .325"
- Gauge .063" (1.6mm)
- Sequence Standard
- Cutter Type Round Chisel
- Recommended File Size 4.8mm (3/16")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 13"-20" (32-50cm)
- Kickback Reduction Features None
View Details
Call for Price
26RSC 74E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RS is part of the Stihl Rapid Super series. 26RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has no significant kickback reduction features (See warnings below), but does has the added benefit of lower vibration levels as compared to the older style 26RS chain. It is recommended for professional use only.
- Pitch .325"
- Gauge .063" (1.6mm)
- Sequence Standard
- Cutter Type Round Chisel
- Recommended File Size 4.8mm (3/16")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 13"-20" (32-50cm)
- Kickback Reduction Features None
View Details
Call for Price
26RSC 81E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RS is part of the Stihl Rapid Super series. 26RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has no significant kickback reduction features (See warnings below), but does has the added benefit of lower vibration levels as compared to the older style 26RS chain. It is recommended for professional use only.
- Pitch .325"
- Gauge .063" (1.6mm)
- Sequence Standard
- Cutter Type Round Chisel
- Recommended File Size 4.8mm (3/16")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 13"-20" (32-50cm)
- Kickback Reduction Features None
View Details
Call for Price
61PMM3 44E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 61PMM3 is part of the Stihl Picco Micro Mini 3 series. This chain has reduced kickback and low vibration features. 61PMM3 is a narrow kerf (.043") low profile saw chain designed for lightweight chainsaws and pruning saws. The combination of reduced kickback and low vibration features with improved cutting and boring efficiencies make it a favorite of professional arborists.
- Pitch .375" Low Profile (3/8" Picco)
- Gauge .043" (1.1mm)
- Sequence Standard
- Cutter Type Low Profile
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 10"-16" (25-40cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
61PMM3 50E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 61PMM3 is part of the Stihl Picco Micro Mini 3 series. This chain has reduced kickback and low vibration features. 61PMM3 is a narrow kerf (.043") low profile saw chain designed for lightweight chainsaws and pruning saws. The combination of reduced kickback and low vibration features with improved cutting and boring efficiencies make it a favorite of professional arborists.
- Pitch .375" Low Profile (3/8" Picco)
- Gauge .043" (1.1mm)
- Sequence Standard
- Cutter Type Low Profile
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 10"-16" (25-40cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
61PMM3 55E CHAIN LOOP
Swiss made OEM chainsaw chain from Stihl. Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 61PMM3 is part of the Stihl Picco Micro Mini 3 series. This chain has reduced kickback and low vibration features. 61PMM3 is a narrow kerf (.043") low profile saw chain designed for lightweight chainsaws and pruning saws. The combination of reduced kickback and low vibration features with improved cutting and boring efficiencies make it a favorite of professional arborists.
- Pitch .375" Low Profile (3/8" Picco)
- Gauge .043" (1.1mm)
- Sequence Standard
- Cutter Type Low Profile Semi-chisel
- Recommended File Size 4.0mm (5/32")
- Recommended Saw Sizes 2.3-3.8 cubic inches (38-62cc)
- Recommended Bar Lengths 10"-16" (25-40cm)
- Kickback Reduction Features Single-Humped Drive Link
View Details
Call for Price
